
Superior Bremerton Insulation serves Gorst homeowners with blown-in insulation, crawl space insulation, and vapor barrier installation throughout Kitsap County. We have worked in this region since 2018 and reply to every inquiry within one business day.

Most Gorst homes from the 1960s and 1970s have attics with settled, thin, or missing insulation - and Kitsap winters are long enough that the heat loss adds up fast. Blown-in insulation fills irregular joist bays and around obstructions completely, making it the right choice for older wood-frame homes where batt insulation leaves gaps.
Gorst sits at the head of Sinclair Inlet, where flat low ground and hillside runoff keep moisture levels high year-round. Insulating crawl space floor joists is one of the most direct ways to stop that ground-level cold and damp from working up into your living space - and it makes a noticeable difference in floor temperatures through the wet season.
The low-lying areas near Sinclair Inlet are mapped as flood hazard zones by FEMA, and even homes away from the water deal with soil that stays saturated from October through spring. A properly installed vapor barrier on the ground surface and foundation walls keeps that moisture from migrating into the wood framing above.
Older wood-frame homes in Gorst - many built in the era before modern energy codes - typically have gaps around wiring, pipes, and top-plate penetrations where conditioned air escapes and outside air enters. Sealing those pathways before new insulation goes in is what turns a routine upgrade into a real improvement in comfort and efficiency.
Rim joists - the framing just above the foundation - are almost always uninsulated in Gorst homes of any age, and they are a primary entry point for cold air and moisture into crawl spaces. Closed-cell spray foam applied directly to rim joists seals and insulates in one step and holds up well against the persistent moisture common near Sinclair Inlet.
Gorst receives around 55 inches of rain per year, and the overcast skies that come with that rainfall limit direct sun on roofs - creating conditions where moss grows aggressively and attic ventilation problems develop quietly. A proper attic insulation assessment here always checks ventilation and moisture conditions before adding new material, so you are not sealing in problems that already exist.
Gorst sits at the southern tip of Sinclair Inlet, squeezed between the water and the forested hillsides where Highway 3 meets Highway 16. That geography means two separate moisture problems: flat ground near the inlet stays wet through the entire rainy season, while steep hillsides above direct water runoff straight toward foundations and crawl spaces below. Add in approximately 55 inches of annual rainfall, and you have conditions that pressure homes from above and below at the same time. Mild winter temperatures drop below freezing several times each season, producing freeze-thaw cycles that stress exposed wood framing and any gaps in the building envelope where moisture has already entered.
The housing stock in and around Gorst reflects Kitsap County's postwar growth, with most homes built between the 1950s and 1980s. These are wood-frame structures with crawl space foundations - the standard construction for this part of western Washington. Crawl spaces in homes of this age commonly have bare dirt floors with no vapor barrier, minimal or degraded floor joist insulation, and rim joists that were never insulated to begin with. A contractor who works this area regularly knows these are not edge cases - they are what most homes here actually look like inside the crawl space.
Our crew works throughout Gorst regularly, and we understand the local conditions that affect insulation work here. Because Gorst is unincorporated Kitsap County, permits are handled through the Kitsap County Department of Community Development rather than a city building department - and we pull those county permits regularly for jobs that require them. The homes we work on here range from older cottages on the hillsides above Sinclair Inlet to mid-century wood-frame houses tucked back into the Douglas fir and cedar forest that covers most of the terrain around the Highway 3 and Highway 16 junction.
Gorst is small but well-connected to the rest of the Kitsap Peninsula. Many residents commute to the Puget Sound Naval Shipyard in nearby Bremerton or take Highway 16 south toward the Tacoma Narrows Bridge. The area is a familiar stretch for our crew - we travel through it regularly on the way to jobs throughout southern Kitsap County. If you are over in Port Orchard, WA or elsewhere in the area, we serve those communities as well.
The forested hillsides around Gorst mean most homes deal with year-round debris on roofs, moss growth from limited direct sun, and root systems that can push up against foundation drainage. These are conditions that affect how we approach crawl space and attic work here. We also serve homeowners in Bremerton just to the north, where the housing conditions and permit requirements share a lot of overlap with what we see in Gorst.
When you reach out, we ask a few quick questions - your address, the age of your home, and what prompted the call. We respond within one business day and schedule an on-site visit that fits your availability.
A technician visits your home - typically within a few days - to inspect the attic, crawl space, and any other areas involved. This visit is free and takes 30 to 45 minutes. We check moisture and ventilation conditions before recommending any material, and we give you a written estimate before leaving.
If the job requires a Kitsap County permit, we handle that paperwork on your behalf. Once the date is set, we let you know what - if anything - needs to be moved or prepared before the crew arrives. Most homeowners do not need to make special arrangements.
The crew completes the work - whether in the attic, crawl space, or both - and cleans up before leaving. Most jobs finish in one day. We do a final walkthrough with you at the end so you can see the finished result and ask any questions before we leave.
We serve homes throughout Gorst and the surrounding Kitsap County area. No pressure, no commitment - just a clear assessment and a written estimate.
(360) 287-4054Gorst is a small unincorporated community in Kitsap County sitting at the head of Sinclair Inlet, where Highway 3 and Highway 16 intersect just west of Bremerton. Because it is unincorporated, there is no city government here - Kitsap County handles permits, inspections, and land use. The community is compact, hemmed in by the water on one side and forested hillsides rising steeply on the others. Most of the residential properties are single-family homes on modest lots, carved out of the second-growth Douglas fir and cedar forest that covers the slopes around the highway junction. The housing stock is largely from the postwar decades, reflecting Kitsap County's growth tied to the Puget Sound Naval Shipyard in Bremerton.
For most Kitsap Peninsula residents, Gorst reads as a pass-through point between Bremerton, Port Orchard, and the bridge corridor to Tacoma - but the people who live here are deeply connected to the area. Many have ties to the shipyard or to the broader naval community at Naval Base Kitsap. The community is geographically close to both Bremerton to the north and Port Orchard to the south, and homeowners here draw on services from both cities. The surrounding forest and the tidal inlet give the area a character that feels distinct from the larger Kitsap towns nearby.
High-density foam with superior moisture resistance and R-value.
Learn MoreBlocks ground moisture to protect structure and indoor air quality.
Learn MoreProfessional vapor barrier installation for lasting moisture control.
Learn MoreCall us today or fill out the contact form. We serve Gorst and all of Kitsap County with free on-site estimates and no-pressure recommendations.